July 3, 2008

Home-Improvement How to Get It Right

Filed under: home — admin @ 1:25 am

Few people who have gone through a major home improvement project will tell you that the whole thing went smoothly and was finished on time and with no problems. There are just too many people involved and too many things that can go wrong. With a little advance preparation, though, hopefully you can avoid the worst home improvement nightmares.

The first thing to do is to put someone in charge, otherwise you’ll end up doing it yourself - architects tend to be good at this, as once they’ve designed the improvement, they will have an idea of who is needed to make it happen.

The next thing you need to do is absolutely vital: budget, budget, budget. It’s so easy to spend far more than you wanted to if you don’t work everything out in advance and set a limit that you won’t go over - a few extras here and there, and before you know it you can’t afford it any more. If possible, negotiate fixed prices with the builders, so that however long the project takes they will get paid the same amount. This will encourage them to finish quickly, and remove the risk of you getting stuck with a large bill. You might need to phone around for a while before you can find someone who will accept the deal on these terms, but as long as you’re offering a reasonable price, they are out there.

Avoid hiring too many specialists, as you don’t need that many people working on a home project. Stick to more general professionals, who can call in people they know to do the parts that must be done by someone trained or registered in that area. Avoid hiring plumbers and electricians directly, for example, as they will just stretch out the work - leave it to the builder to bring in his own plumber or electrician instead.

John Gibb is the owner of Home-Design guides For more information on home design check out http://www.Home-Design-guides.Info

Tags: diy, , , Home, improvements

May 4, 2008

Passive Solar Problems - Too Much Heat

Filed under: home — admin @ 3:41 am

Solar energy presents one of the cleanest renewable energy platforms we have available to us. Sometimes, however, it works to well and can turn your house into a scorcher.

Although you probably do not realize it, your home is heated using passive solar as the energy source. No, we are not talking about solar panels here. Instead, passive solar simply refers to the heat produced when sunlight inherently enters you home through windows and starts to produce heat by warming up floors, furniture, carpets and so on. In some instances, savvy people intentionally orient their house to take advantage of passive solar, but most people don’t have a clue it is happening.

The sun is extremely powerful. Obviously, it is the basis of all life on our planet. Most people don’t realize how much energy is contained in sunlight. For example, how many times have you left a vehicle in a parking lot only to come back and find it blazing hot inside? This is passive solar at its finite best. The sunlight penetrates through the windows and heats up the interior of the vehicle. Now you understand passive solar and, ironically, one of the potential problems with it.

When it comes to passive solar heating in a home, it can work to well. Regardless of whether you are intentionally or unintentionally pursuing passive solar, you know how hot a home can get. During the summer, it can be downright brutal. There are, however, simple steps you can take to mitigate this problem.

The first problem has to do with intrusion. Simply put, too much sun is penetrating into your home. You already know the answer from a common sense perspective - shading. In this case, you need to pull the shades over windows on the south facing side of the house. In the northern hemisphere, the south side of your home will always get the most sun. If you don’t want to put shades up, close the door to the room in question to cut off the heat circulation. You can open it later in the evening when things start getting cool and you could use a bit of heat.

If you are intentionally designing for passive solar, there is a landscaping trick you can do to maximize passive solar production in winter, but limit it in summer. In this case, we are talking about trees. Specifically, you should plant trees that grow a heavy leaf canopy in the summer, but lose all their leaves in the winter. Put in front of large windows, these trees will act as a natural temperature regulator for your passive solar system.

Ultimately, the key to beating too much heat in your house during the summer is to simply understand where it is coming from. If you can block the ingress of the sunlight, you can cut the heat to manageable levels.

Rick Chapo is with SolarCompanies.com, a directory of solar energy companies.

Tags: energy, , , , , , , , , , , heat, heating, Home, hot, house, improvements, passive, power, shading, solar
Close
E-mail It